Education:

- Bachelors or Master Degree in Mechanical Engineering with good consistent academic records

- Relevant experience in Refinery/Petrochemical/Chemical plant Rotating machine maintenance and hands on experience in condition monitoring of Rotating equipment

Job Accountabilities:

- Implementation of CM schedule and take necessary action to achieve target CM compliance.

- Review of all vibration cases observed during previous day.

- Analysis of collected vibration data for exception cases.

- Send recommendations to reduce the vibration of equipment having abnormal vibration signature and trends.

- Analysis of critical machines by condition monitoring using offline and online tools such as System-1, ADRE.

- Carry out dynamic balancing in Workshop and in plant in-situ.

- Witness LSB and HSB at vendor works.

- Study and resolve chronic vibration cases.

- Preparing and ensuring compliance to the routine data collection of the plant rotary machines.

- Assist plant Operation and maintenance in troubleshooting critical problems.

- Perform Failure analysis and Root cause analysis (RCA) of repetitive failures

- Review and optimize CM frequencies.

- Applying the leanings from RCA to proactively increase the reliability of other assets.

- Training faculty for in-house programs related to rotary equipment/condition monitoring.

- Provide assistance during commissioning of new equipment or overhauled equipment.

- Facilitate improvement in techniques - Vibration analysis, Oil analysis, NAS, etc.

TECHNICAL KNOWLEDGE & SKILLS:

- Thorough knowledge and experience of Spectrum analysis using various systems

- Should be able to carry out balancing of Rotary equipment in workshop and in field

- Thorough knowledge of Emerson CSI 2130/2140

- Thorough knowledge of online monitoring using System-1, ADRE

- Should be able to configure the vibration measuring points for data collection and analysis.

- Knowledge of rotating equipment maintenance techniques and types

- Knowledge of Rotary equipment repair

- Knowledge of Reliability principles (RCM/FMEA, Statistical tools)

- Knowledge of industry standards and codes (API, ASME, ISO etc.)

This job opening was posted long time back. It may not be active. Nor was it removed by the recruiter. Please use your discretion.